|
Risers
Lids Filters Adapter Plates Plastic
Kit |
|
BODE’S
Precast is
an authorized vendor for all Polylok products and carries a large
inventory of Polylok risers, lids, filters, and adapter plates. |
|
 |
About Polylok
Polylok, Inc. is an international supplier of
plastic injection molded products for the precast concrete and onsite
wastewater industries. Our home office is located in
Wallingford,
Connecticut and we have partnerships with several supply houses across
the United States and Canada. Unlike most of our competitors, we
design, manufacture and ship our products from our Wallingford
location. In addition, we hold over 45 patents and produce over 100
products for the precast, drainage and onsite wastewater industries. |
20'' & 24" Riser
& Covers
These risers combine all the best features of
concrete and plastic to offer a superior product. We make risers that
hold their shape, are stackable, screw together, and are watertight and
airtight. Each riser and cover has a factory installed gasket to ensure
a watertight seal. No other riser manufacturer can make that claim!
U.S. Patent No# 6,655,093 6,688,072 6,484,451
|
Riser Lid - 20" or 24" |
Shown above- 3 stacked plus lid |
Features
Our
riser covers are designed to meet your needs:
- Factory installed gaskets
in Risers and Covers at no cost
- Watertight and Airtight
- Allows septic tank to be
easily vacuum or water tested
- Highest UV-Ray Protection
on the market today
- Easy to bring septic
access to grade
- Made of High Density
Polyethylene which won’t shatter like some Polypropylene
risers
|
|
 |
12'' Tall Riser
The best just got better. You asked for it and
now we have have it. Polylok is proud to
introduce a new 1 foot tall riser in either 20" or 24" diameter. It has
the same high quality as the 6" tall Risers,
but with fewer screws. |
|
Adapter Ring
Perfect for Retro fitting onto existing
tanks. Covers up to a 25'' square opening. |
 |
Features
- Adapter
ring accepts either 20'' or 24'' Riser
- Covers up to 25'' square
opening
- Perfect for retrofitting
onto existing tanks
- Save time and money
|
|
|
PL122 Effluent
Filter |
Zabel Filter |
 |
  |
|
Extend & Lok®
Makes Filter Installation EASY! Easy to
install in hard to reach places. This is a simple way to install
filters in tough to reach areas with the new Extend & Lok™ by
Polylok. No more fighting with outlet pipes that are flush
against the septic tank wall. Simply hammer in the PVC friction
fit Extend & Lok™ and that’s it! The filter or inlet tee now can
easily be installed and centered under the riser. Extend & Lok™
Makes for Easy Installation on Existing Systems Patent Pending
|
 |
Features
- Fits any 4'' or 3'' pipe
- Centers filter or tee
under riser
- Easy Installation
- No gluing necessary
|
|
 |
