|
| |
 |
PL-122 Effluent
Filter
The PL-122 was the first filter developed by
Polylok. The biggest advantage of this filter is that it has an
automatic shut off ball built into every filter. When the filter
is removed for regular cleaning, the ball will float up and
temporarily shut off the system so the effluent won’t leave the
tank. To this day, no other manufacturer can make that claim. It
is also rated for 1,500 GPD (Gallons Per Day) and is NSF
approved. |
Features
- Offers over 122 linear feet of 1/16th inch filter slots,
which significantly extends time between cleanings
- Has a flow control ball that shuts off the flow of
effluent when the filter is removed for cleanings
- Has its own gas deflector ball which deflects solids
away
- Installs easily in new tanks, or retrofits in existing
systems
- Comes complete with its own housing; no gluing of tees
or pipe, no extra parts to buy
- Rated for 1500 GPD
- Has a modular design Allowing for increased filtration
The PL-122 Effluent Filter should operate efficiently for
several years under normal conditions before requiring cleaning.
It is recommended that the filter be cleaned every time the tank
is pumped or at least every three years. If the installed filter
contains an optional alarm, the owner will be notified by an
alarm when the filter needs servicing. Servicing should be done
by a certified septic tank pumper or installer. |
|
|
